USPP is a computer temperature controller that maintains the desired temperature, and measures the preset time. The controller can be used to control electric or other bakery ovens. The controller is implemented in the version of the control: a Simple-PID control as well as hysteresis type. The versatility of the controller allows the use of a solution USPP also in other applications where it is necessary to maintain the temperature and timing. Process parameters set during programming are saved in non-volatile memory controller. There is no need to re-set the parameters after power-up.

The controller is a regulator USPP channel, is performed in a time-independent maintenance of temperature for the two channels. The program reads the temperature of the two temperature sensors, control contactors or team triacs or thyristors. Because of the two sensors, the controller can also act as a regulator of the two thresholds odmierzanym time, or two independent single-channel temperature controller.

All parameters set during programming are entered using the keyboard plastic covering the front panel. The measured temperature value of the selected channel is presented in real time on the display. Measured time is shown on a separate display. The front panel of the controller are LEDs that currently outputs are enabled or disabled. Also signaled alarm ALARM LED (exceeding allowable temperature, damage actuators, sensor failure). Each channel has two independent outputs included włączanej power-sharing within a single channel. In addition, the controller has two independent voltage outputs a turn-off to control the inclusion of additional features such as lighting, ventilation, condensation, etc. The controller has audible indication of the measuring set time (such as the end of baking).

The device is powered by 230 VAC, in the case of a power failure the controller state is stored in non-volatile memory so that when power is interrupted to continue. Supply voltage can be tailored to the individual needs of the client. The device is made in the form of a module placed in a metal housing with dimensions of 90x90x120 mm and 96x96 mm faceplate or plastic housing with dimensions of 90x90x100 mm and 96x96 mm faceplate. The controller can operate in an ambient temperature range of 0 - 60 ° C.

Due to the versatility and easy installation output driver can be used both in new furnaces already in operation as well.

Implemented features:

• thermal process control
• maintaining the temperature,
• Timing,
• number of temperature measurement inputs: max 2
• measured temperature range 999 ° C
• maximum length of the measured time 99 min or 99h
• type of temperature sensor: thermocouple or PT100
• Control: contactors, triacs, thyristors
• type of control: Simple-PID or hysteresis
• sound signaling the end of time period
• alarm signals:
• - Exceeding the allowable temperature
• - Damage to the actuators (relay, triac)
• - Sensor failure
• non-volatile memory to store your settings
• continuation of the process after power failure
• able to use as a controller with relay
• Typical applications: bakery ovens control