Drivers are specialized USPP series two-channel microprocessor-based controllers to control the operation of bakery ovens. This family of controllers is developed. They are produced in a version for use in bakery ovens gas, oil and electric.

Depending on demand can directly control contactors or solid state power systems. Cooperate with a PT100 sensor and optionally the various thermocouples.

They are used in both new bakery ovens, as well as the repair of worn furnaces. The main task USPP-TCF driver, designed for furnaces tape is to keep the set temperature and the transition timing belt through the oven or measurement frequency inverter.

The controller is equipped with two relay outputs switchable from the front panel allows control of additional functions.

Implemented features:

• maintaining the temperature in two independent channels,
• transition timing belt through the oven,
• measurement frequency inverter
• number of measuring inputs: 3
• measured temperature range: up to 999 ° C
• measured time range: up to 99 min.
• the measured frequency range: up to 99 Hz
• type of temperature sensor: PT100 thermocouple or optional
• Control: contactors, triacs, thyristors
• thermostat control type: Simple-PID / histerezowy
• parameters can be programmed by the user
• Sound and light alarm signals
• non-volatile memory to store your settings
• continuation of the process after power failure
• Typical application: control of belt furnaces