Wybierz język:
Dispenser of liquids

Precise dosing of liquids allows dispensing any liquid substance.
For example, one of the completed projects was caustic soda dispenser.


Dispenser for precise dispensing any liquid substance. Depending on the needs it is possible to dosage in liters or kilograms as well as other units as required.
Dispensers are made of stainless steel.


Performance and accuracy depends on the diameter and length of tubing metering input suction hoses. Therefore before ordering the device is recommended to determine the parameters and selecting the optimal size of the tubing.


Typically, dosing accuracy is about 3%. Dispensers are, however, self-calibration function, which at constant input tubing arrangement allows for increased accuracy up to 0.5%.


Dispensers are based on a peristaltic pump. It is a self-priming pump, which dispenses the liquid is in contact only with the tubing, which is dispensed. Other elements of the dispenser does not come into contact with the liquid so that they are very sterile equipment.
Tubing to the pump are made of Marprene, have high chemical resistance, and are of very high quality.
Inside the dispenser is typically applied to the silicone tubing connections. If necessary, can be changed to a different type.
The maximum outlet pressure is 1.5 bar. The dispenser is protected from plugging the output during dispensing.
Input under pressure is a maximum of 0.6 bar for models 520R2 and 0.4 bar for the other.


520R2 labeled versions have higher capacity pump. For water and metering tube dia. 8mm, it is about 4.5 l / min.
Dispensers can be equipped with an external input switching allows dosing LOSS external contact such as the photocells.
Performance version is unmarked 520R2 hose for water and 4.8mm about 0.9 l / min.
Dispensers are marked DSC1 monorail, and marked DSC2 two-track (two independent dosing).


Also produce a substance of liquid dispensers for dispensing liquids such as cyclic bottle. Devices of this type perfectly solve the problem of the manual packaging of liquids. Once placed on the amount of liquid is periodically dosed with a set interval between successive dozowaniami. A person only needs to dub pouring empty bottles to be filled.


We also offer stainless steel accessories to lance dispenser such as input, output spout, spout cup to suspend output and connection hoses


We are able to perform any configuration of the dispenser.