UR11 is a low-cost temperature controller with a wide range of applications. It can be used as a stand-alone unit (it has a built-in relay) or control additional switching elements - contactors. Digital temperature allows you to read with an accuracy of 1 ° C.

UR11 can regulate the temperature in the range of 0 to 999 ° C depending on the type of sensor. It is adapted for PT100 temperature sensors or thermocouples. The controller is powered directly from 230V, 50Hz. It has a built-in relay changeover contact current two. Each contact can switch current and voltage 6A 230V AC. The metal casing has dimensions of 90x90x75 mm and 96x96 mm faceplate. Operation temperature range is from 0 to 70 ° C.

size displays
- If the key is not pressed the display shows the measured temperature,
- When a key is pressed the display shows the temperature set point.

Entering the setting
Knob to enter your settings. Simultaneous pressing causes the entered size setting is displayed on the screen.

versions control
- A digital control, the hysteresis typically 3 ° C,
- Simple-PID control, PID pulse range + / - 7 ° C, typical PID cycle time 18 sec.

Regulator replaced by a new generation controller TRM12.