UR12 is a modern and cost-effective humidity control for a wide range of applications. It can be used as a stand-alone unit (it has a built-in relay) or control additional switching elements - contactors. Digital measurement of humidity allows you to read with an accuracy of 0.1 percent.

UR12 can regulate the humidity in the range of 10 to 90 percent. The hysteresis is typically 3 percent moisture content. Works with the measuring humidity TELDREAM PCA production. The controller is powered directly from the mains 220V, 50Hz. It has a built-in relay changeover contact current two. Each contact can switch current and voltage 6A 220V AC. The metal casing has dimensions of 90x90x75 mm and 96x96 mm faceplate. Operation temperature range is from 0 to 70 degrees Celsius.

size displays
when the key is not pressed the display shows the measured value of moisture
when a key is pressed the display shows the set point humidity.

Entering the setting
Knob to enter your settings. Simultaneous pressing causes the entered size setting is displayed on the screen.

Regulator replaced by a new generation controller TRM12.